rf25m, be25m, be25s series www.samtec.com rf25m?01sp1?scc21?0152 xxxx = oal (millimeters) for complete speci cations see www.samtec.com?rf25m www.samtec.com?be25m or www.samtec.com?be25s rf connector: outer contact material: brass (sma) center contact material: brass ( sma plug) becu (sma jack) plating: 30? (0,76?) gold on center contact, gold ash on shell (sma) insulator material: ptfe operating temperature: -65? to +165? insulator resistance: 5,000 m impedance: 50 frequency range: 0~20 ghz rohs compliant: ye s cable: type: low loss microwave coax gauge: 25 awg silver plated copper dielectric: rf25m air enhanced fep be25(x) solid fep jacket material: fep impedance: 50 ? propagation delay: 3.84 nsec/meter capacitance: 75.4 pf/meter note: cable lengths longer than 40.00" (1 meter) are not supported with s.i. test data. note: some lengths, styles and options are non-standard, non-returnable. specifications rf25m mates with: cch-j-01 be25x mates with: cch-j-22, crm also available ?extraction tool: cat-ex-scc-01. ?additional plating options available. call samtec. ?01bj1?scc11 shown cable type cable type end 1 connector overall length overall length phase matching end option no. of phase matched ??xxxx? = overall length in millimeters ?0100 (100mm) 3.94" minimum ?01.0 = 1 pico-second (not available with -0457 & -0914 cable length) ?02.5 = 2.5 pico-second (not available with -0914 cable length) ?05.0 = 5.0 pico-second ?10.0 = 10.0 pico-second ?02 = 1 pair ?04 = 2 pairs ?06 = 3 pairs ?08 = 4 pairs end 2 connector rf25m = air enhanced dielectric 25 awg microwave cable be25m = air enhanced dielectric 25 awg microwave cable be25s = solid fep dielectric 25 awg microwave cable specify end options from chart specify instrument end option from chart stripped & tinned (dimensions in mm) both center conductor and braid shield are stripped and tinned. call samtec for other sizes. callout ?303030 ?303040 ?403030 ?403040 ?404040 a 3.0 3.0 4.0 4.0 4.0 b 3.0 3.0 3.0 3.0 4.0 c 3.0 4.0 3.0 4.0 4.0 microwave coax test cables ?0152 = (152,4mm) 6.00" ?0305 = (304,8mm) 12.00" ?0457 = (457,2mm) 18.00" ?0914 = (914,4mm) 36.00" instrument end options ?01sp1 = sma, straight plug ?01bj1 = sma, bulkhead jack end options ?01sp1 = sma, straight plug ?01bj1 = sma, bulkhead jack scc11 = coax test point with standard ferrule (mates with cch??1 only) ?scc21 = coax test point with knurled ferrule (mates with cch??1 only) end options ?sing = single-ended (end 2 only) xxxxxx = stripped & tinned (end 2 only) a b c xxxx = oal (millimeters) ?01sp1 shown for use with cch-j-22 and crm test points for use with cch-j-01 test points csf-210 j1 ea ?01 bu ?10 = 10.0 pico- sma, .0 secon = d xxxx a l(m 0 ?0914 914,4mm 6.00" for use with cch-j-2 and crm test points
|